G2 Caliper/Rotor/Engine Epoxy Paint
Painting your brake calipers and rotors(or engine!) is one of the best ways to make your vehicle stand out from the rest without "feeling it" in your wallet. Most cars we see driving around today have old rusty rotors and calipers popping out into view which makes the car look old and neglected, even if it's not.
Here at NWP, we've got over 15 years experience with countless high-temp paint products as well as application options. We have tried everything from rattle can spray-on caliper paint to brush-on applications of all different manufactures. Needless to say, none of these caliper paints held up as the paints quickly faded and begain to chip away within only 1-2 months under normal driving conditions! We wanted something that would be comparable or equivalent to powdercoating, or better!!
Then we finally discovered the two part epoxy caliper paint by G2USA. It is designed to be brushed on, although has proven to work just as well when sprayed on with a portable aerosol sprayer, air brush, or paint gun. It dries rock hard making it virtually chip proof much like powdercoating. G2 is resistant up to 980+ degrees and has that THICK glossy clear coat finish we're all looking for that will shine no matter how hot you get em'! Not to mention protecting your calipers from brake dust, harsh fluids, dirt and road debris. We've tried them all, G2 is by far the best way to go... longevity and quality comparable to powder coating at a fraction of the cost!? THIS is what we've been waiting 16 years for!!!!!
ALL G2 products are 100% MADE IN THE USA!!!
2006 BMW M6... Calipers painted yellow and rotor hubs painted black using the G2 System!! Nothin' but the best for this black beauty!
M6 modless, straight off the delivery truck...
G2 Yellow 1st Coat...Excellent coverage, only 2 coats needed and applied
G2 Yellow/Black Brake Beautification COMPLETE!! With other "go fast" goodies as well...
NWP G2 PAINT APPLICATION PRICING:
- Stg1($99)- Remove all 4 wheels, degrease/wire brush/clean all 4 calipers and brackets, mix and apply 2 coats Paint(color choices) to all visible yet accessable calipers/brackets with applicator brush. Reinstall and torque wheels to proper specifications.
- Stg2($129)- Includes Stg1 above + degrease/wire brush/clean visible outer rotor vents and hubs, apply 2 coats Paint (color choices)to all rotor vents and center hubs.
- Stg3($199)- Includes Stg1 & Stg2 above + removal of all calipers, brackets, rotors and pads. A thorough cleaning/degreasing of all visible/paintable inner wheel wells, suspension components and backing plates before 3-4 coats of semi-gloss black protective enamel paint is applied. This will help protect your vehicle from future corrosion, and give it a fresh n' clean new look from any angle! Mix and apply 2 coats= Paint (color choices) to all calipers/brackets, rotor vents and hubs before re-assembly...so you can be sure there will be no "naked" spots due to hard to reach area's while brakes are still fully assembled. Let dry, then re-assemble brake components while cleaning & lubing all caliper pistons, slides and pad contact points. Also included is a tire rotation (if needed) and pressure check, a thorough exterior car wash/dry, and a nice thick coat of McGuire's Tire Shine to really set off your fresh new brake colors!!
- NOTE 1- Pricing stated above is based on the use of ONE (1) BASIC G2 Paint Kit/Color. If your vehicle requires more than one paint kit or you wish to apply more than one basic color (1 color for calipers/brackets and 1 color for rotor vents/hubs)... Add $43 per kit to pricing stated above
- NOTE 2- Pricing stated above is also based on the use of G2 Base Color Options. If your looking to go with the "Limited Edition Mustang Colors" ... Contact Ian for special pricing
Colors: Red, Yellow, Blue, Silver, Black, Purple, Green, White, Gold, Orange & Pink.
Limited Edition Mustang Colors: Legend Lime, Vista Blue, Tungsten Gray, Red Fire, Torch Red, Windveil Blue and Grabber Orange
Color Matching Available: Looking to match the color of your calipers to the color of your car? All we need is the "paint code" of the specific car your looking to match...and G2 will match it EXACT! Simple as that!